Anode Water Separator for Fuel Cell Systems- Fundamentals
I. Introduction to the Anode Water Separator
The purpose of the anode water separator (hereinafter referred to as the “water separator”) is to separate liquid water from the wet hydrogen at the stack outlet, thereby preventing excessive liquid water from entering the anode inside the stack and causing phenomena such as stack flooding. In addition, water accumulated in the anode circulation increases the workload of the hydrogen circulation pump or ejector, reducing their performance and even causing equipment failure.
As water separators are increasingly used in fuel cells, their integration level is also becoming higher. The main functions of mainstream water separators include:
a) Liquid water separation efficiency;
b) Water storage function;
c) Timed drainage and exhaust function;
d) Autonomous heating and ice-melting function for cold start.
II. Types of Water Separators and Their Advantages and Disadvantages
There are many types of water separators. When adapting them to fuel cells, it is necessary to confirm the type of water separator before designing or purchasing, which will yield better results with less effort. The figure below summarizes and analyzes the advantages and disadvantages of various types of water separators.

[Figure 1] Types of water separators and their advantages and disadvantages
In the fuel cell field, baffle-type or centrifugal water separators should be selected where possible. Their flow resistance, separation efficiency, and cost can all be well adapted to the fuel cell system. As fuel cell systems become larger, the temperature of the hydrogen–oxygen reaction in the system will become higher (currently 70–80 °C, and expected to increase further in the future). The author selects the centrifugal water separator as the design or procurement solution; this will be discussed in detail in subsequent articles.
III. Introduction to Domestic and Foreign Water Separators
This section introduces foreign products, specifically TLV Steam Experts (a Japanese company founded in 1950 and currently recognized as a leader in the steam industry). Liquid water is separated from hydrogen based on the difference in gas–liquid centrifugal force.

[Figure 2] Two products from TLV Steam Experts
Domestic water separators adopt more varied approaches, and domestic patents in recent years can be consulted. For example:
a) Shanghai Re-fire independently designed a centrifugal water separator;
b) Guangzhou Guohong adopted a combination of baffle and gravity types;
c) Shanghai Jie qing has baffle-type and centrifugal water separators, etc.
In short, the water separator suitable for the system is the best water separator.
IV. Design of the Water Separator(Detailed explanation to be provided in subsequent articles.)
As one of the core components of the stack, the efficiency and flow resistance of the water separator are important factors for evaluating its quality. A water separator with high efficiency and low flow resistance represents the mainstream product of the future. The baffle-type water separator has a regular shape and occupies little space, but its separation efficiency is relatively low. The cyclone-type water separator is cylindrical and does not use space efficiently, but it has high separation efficiency and relatively low flow resistance. On the anode side of the fuel cell, a water separator with relatively high separation efficiency and relatively low flow resistance is required. The author believes that the centrifugal water separator will be the mainstream water separator product in the future.

[Figure 3] Comparison of separation efficiency between TLV centrifugal and baffle-type water separators
When designing or purchasing a water separator, it is necessary to understand its main parameters:
a) Separation efficiency: generally required to be ≥90%, with excellent products above 95%;
b) Water separator flow resistance: generally required to be ≤10 kPa, with excellent products below 5 kPa;
c) Water storage capacity: determined by the rated power of the system. The author considers a water storage capacity corresponding to approximately 10 seconds of anode drainage volume of the system to be preferable;
d) Integration level: whether it includes heating, exhaust, drain valve, liquid level sensor, etc. The higher the integration level, the better it can compensate for the structural defects of the centrifugal water separator and increase space utilization.
During the development of the water separator, attention should also be paid to the above points. In addition, attention should be paid to simplifying the structure of the water separator and controlling the number of parts of the anode water separator itself. This can control costs, reduce the use of sealing rings, and improve the safety performance of the water separator.
If you have any requirements, please contact Yibaijia Hydrogen Energy Technology Co., Ltd. to customize an Anode Water Separator.
Email: andygu@ybjhydro.com and gavin@ybjhydro.com.
Website: www.ybjhydro.com.